Turntable bearing maintenance:

1, Check the bearing before cleaning the turntable bearing Also, check the amount of 

lubricant remaining and sample the lubricant before cleaning the bearings.
2, bearing cleaning in two steps: rough wash and fine wash, and the bottom of the container 

can be placed on a metal grid.
3, Rough wash, remove the grease or adhesive in the oil with a brush. At this time if the 

bearing rotation in the oil, pay attention to damage due to foreign bodies rolling surface.
4, Fine cleaning, slowly turning the bearings in the oil, bearing to be carefully carried 

out. Commonly used cleaning agents are neutral, non-aqueous diesel or kerosene, sometimes 

depending on the need to use warm lye and so on. No matter what kind of cleaning agents, 

should always be filtered to keep clean. After cleaning, apply anti-rust oil or anti-rust 

grease on the bearing immediately.
Our Slewing bearing with single row four point contact ball has long service life with good 

maintenance.